PISCO Tube Fitting Brass Branch Tee Tube 6 Thread R1/4 Rubber HNBR

[Features]
●In addition to the main body, the release ring is also made of brass, making it flame retardant and spatter resistant.
●The covered type prevents spatter, dust, etc. from entering the inside of the fitting.

[Applications]
-

【specification】
● Connection diameter: R1/4
● Applicable tube outer diameter D (mm): 6
Hexagonal width (mm): 14
●Fluid used: Air, water (conditions apply), heat transfer oil (conditions apply)

[Specification 2]
● Operating temperature range: 0 to 100°C (no freezing)
● Maximum operating pressure: 1.0MPa
● Vacuum pressure used: -100kPa

[Material/Finish]
Body: Brass + electroless nickel plating
●Seal rubber: Hydrogenated nitrile rubber (HNBR)

[Set contents/accessories]
-

【Note】
●If the fluid used is heat transfer oil, the heat transfer oil may adhere to the release ring and guide ring and solidify, causing sliding problems and interfering with the release or locking functions. When using, please make sure there is no heat transfer oil on the release ring or guide ring. Also, when reconnecting the tube, make sure that the tube will not come loose before using.