Pisco tube fitting brass straight tube 8 screw R1/4 rubber HNBR

[Features] ● In addition to the main body, brass is also used for the release ring. ●With a cover, the release ring does not malfunction due to spatter, making it ideal for environments where spatter occurs. ●The model without cover is also available as standard, so it can be used for many purposes. ●For use in non-spatter resistant environments (mold cooling water pipes, etc.), we recommend a die without a cover.

[Use]
-

[Specifications] Port size: R1/4 Applicable tube outer diameter D (mm): 8 Width across flats (mm): 14 Fluids used: air, water (conditions apply), thermal oil

[Specification 2] ● Operating temperature range: 0 to 100°C (no freezing) ● Maximum working pressure: 1 MPa ● Working vacuum pressure: -100 kPa

[Material/Finish] ●Body: Brass + electroless nickel plating ●Seal rubber: Hydrogenated nitrile rubber (HNBR)

[Set contents/accessories]
-

[Caution] ● When using water as the fluid, be sure to observe the following conditions. : 1. When using water, keep the surge pressure below the maximum operating pressure. 2.Be sure to use the insert ring when using water. Failure to use an insert ring may result in joint damage, tube disconnection, or leakage.