KTC 1/4" cordless driver set

[Features]● 15 levels of clutch mechanism + drill mode can be set, reducing mistakes such as screw head damage and over-tightening. - The main body can be transformed into two forms according to the place of use and how to hold it. ●When the clutch works, the power is automatically shut off, preventing wasteful use of the battery. ●Hand-tightening can be done by turning off the switch, so you can check the final tightening by hand. ●Rotation speed can be switched between HIGH and LOW according to the work. ●It is lightweight, compact, convenient to carry, and effective for work in narrow spaces. ●Comes with two double-ended No.2 bits. ● 1/4 bit applicable to JTAE115 can be used.

[Applications] ●Electrical and housing construction, manufacturing assembly parts, equipment maintenance, etc.

[Specifications] ● No-load rotation speed (min [[-1 power]]) Kosoku: 450 ● Maximum torque (N m): 3.9 ● Maximum tightening torque (N m): 3.9 ● No-load rotation speed ( min [[-1 power]]) Low speed: 220 ● Voltage (V): 3.6 ● Chuck capacity (mm): 6 ● Depth (mm): 283 ● Drilling capacity (mm) Iron work: 3 ● Height (mm) : 48 ● Charging time (minutes): approx. 60 ● Width (mm): 43 ● Height (mm): 48 ● Depth (mm): 283 ● Width (mm): 43 ● Drilling capacity (mm) iron work: 3 ● Chuck capacity (mm): 6 Charging time (minutes): about 60

[Specification 2] Small screw: ~ M5, Wood screw: ~ φ4.1, Drilling: ~ φ3 (Cannot be used for screw tightening for aluminum sash mounting)

[Material/Finish]
-

[Set Contents/Accessories] Dedicated resin case (W301 x D294 x H91), double-ended No.2 bits (2 pieces), battery pack (JBE3615A), charger (JHE036A)

【Note】
-