Sanko IT hanger ITL-M type

[Features] ● A stable holding force can be obtained through penetration construction. ●It does not damage the ALC panel by tightening penetration construction. ●Does not damage the ALC panel during tightening through construction. ● Good workability due to the spring effect. ● Can be installed on walls and floors.

[Use] ● For ALC panels. ●For distribution board installation, rain gutter installation, etc.

[Specifications] - Screw designation: M10 - Pilot hole diameter (mm): 17.0 - Plate length (mm): 55 - Length (mm): 185 - Screw length (mm): 90 - Tensile maximum load (kN) ): 6.4 - Tightening plate thickness (mm): 1 to 10 - Required hollow part (mm): 57

[Specification 2] boxed

[Material/Finish] ●Steel ●Surface treatment: trivalent chromate treatment

[Set Contents/Accessories] Seat nut

[Caution] ●The maximum tensile load is the value when the ALC panel compressive strength is Fc4N/m [[M2]].