IKURA Light Tig IS K-LT201AD2 (40066)

[Features] ● Can be used for both 100V and 200V. ●For both DC and AC. ●Various settings can be easily made with a single dial. ●It has a memory function that automatically memorizes the setting values in use and reads them automatically at startup. ●Up-slope/down-slope control enables uniform welding. ●Equipped with hand rod welding functions such as arc force function, arc start function, adhesion prevention function, and electric shock prevention function.

[Use] ● For welding various materials and plate thicknesses such as iron and stainless steel.

[Specifications] - Welding rod diameter (mm): 1.6 to 3.2 (TIG filler rod at 200V) - Rated input (kVA) TIG DC: 1.6/5.6 - Input voltage (V): Single phase 100/200 - Rated input ( kVA) (100V/200V) TIG DC: 1.6/5.6 ●Rated input (kVA) TIG AC: 1.6/5.6 ●Rated input (kVA) (100V/200V) TIG AC: 1.6/5.6 ●Rated input (kVA) (100V) /200V) Manual welding: 2.6/6.0 ●Rated input (kVA) Manual welding: 2.6/6.0 ●Current range (A) (100V/200V) TIG DC: 5 to 100/5 to 200 ●Current range (A) TIG DC: 5 ~ 100/5 ~ 200 Current range (A) (100V/200V) Hand welding: 10 ~ 80/10 ~ 130 Current range (A) TIG AC: 5 ~ 100/5 ~ 200 Current Range (A) Hand stick welding: 10 ~ 80/10 ~ 130 Usage rate (%) TIG welding (100V/200V): 100/30 Current range (A) (100V/200V) TIG AC: 5 ~ 100/ 5 to 200 ●Usage rate (%) Hand welding (100V/200V): 30/30 ●Power cable length (m): 3

[Specification 2] ● 100V/200V dual use ● DC/AC TIG welding ● Input capacity: 5.6 kVA (1.6 kVA)), rated output current: 200 A (100 A) ● No-load voltage: 70 V ● Rated usage rate: 30% (100 %) Pre-flow/post-flow: 0 to 0.5 seconds/0 to 20.0 seconds, up/down slope: 0 to 15.0 seconds ● Initial current setting, welding current, crater current, pulse welding current, pulse base current: 5 to 200 A ( 5 to 100A) *15A to AC welding mode Pulse width: 1 to 99%, Pulse frequency: 0.2 to 500Hz *0.2 to 20Hz in AC welding mode Cooling width: -25 to 10%, Cooling range: - 20-20% AC frequency: 50-100Hz

[Material/Finish]
-

[Set Contents/Accessories] ●Torch cable 8m ●Input cable 3m (3-core 3.5sq) ●Cable with ground clip 3m ●Argon regulator (hose 3m) ●Tungsten electrode φ2.4×2 ●Collet body×2 (φ2.4, φ3.2) ● Collet chuck x 4 (φ1.6, φ2.0, φ2.4, φ3.2) ● Nozzle x 4 (No.4, No.5, No.6, No.7) ● Long cap x 1, Short cap x 1 ● Insulation cover x 1

【Note】
-