TOP monkey type torque head (with scale) mouth opening 17-38 mm

[Features]● Since the direction of insertion into the torque handle can be changed, torque tightening work can be done with a swing width space of 30°. A swing width space of 60° is required for a general monkey-type torque wrench. ● Equipped with a backlash-less worm (PAT.) that sandwiches the rack of the lower jaw between two worms to eliminate backlash and reduce the gap between the bolt/nut and the gripping surface, preventing damage to the corners. ●With a scale.

[Applications] - Widely used in bicycles, automobiles, architecture, construction, water supply, electric power industry, etc.

[Specifications] ● Connector inner diameter (mm): φ18 ● Mouth width (mm) minimum: 17 ● Mouth width (mm) maximum: 38 ● Overall length (mm): 95 ● Applicable torque handle digital type: DT200-18BN ● Applicable torque Handle preset type: T-180NTK Effective length (mm): 80 Mouth opening dimension (mm): 17 to 38 Head outer width (mm): 66 Thickness T1 (mm): 12.5 Thickness T2 ( mm): 6.5 Applicable torque handle: T-180NT, DT200-18BN

[Specification 2]
-

[Material/Finish]
-

[Set contents/accessories]
-

[Caution] ● Do not insert the connector part of the torque handle into a plunger pin type. Please insert it into the steel ball type. ● When inserting a bolt or nut, align the mouth opening with the width across flats and insert it so that it hits the spring pin. ● Do not hang diagonally or shallowly.