TOP monkey type torque head (with scale) mouth opening 10-30 mm

[Features]●The direction of insertion into the torque handle can be changed, so torque tightening work can be done with a swing width space of 30°. A swing width space of 60° is required for a general monkey-type torque wrench. ● Equipped with a backlash-less worm (PAT.) that sandwiches the rack of the lower jaw between two worms to eliminate backlash and reduce the gap between the bolt/nut and the gripping surface, preventing damage to the corners. ●With a scale.

[Applications] - Widely used in bicycles, automobiles, architecture, construction, water supply, electric power industry, etc.

[Specifications] ● Connector inner diameter (mm): φ15 ● Mouth width (mm) minimum: 10 ● Mouth width (mm) maximum: 30 ● Overall length (mm): 79 ● Applicable torque handle digital type: DT15BN, 135-15BN ● Applicable torque handle preset type: T-100NTK ● Effective length (mm): 65 ● Mouth opening dimension (mm): 10 to 30 ● Head outer width (mm): 58 ● Thickness T1 (mm): 12 ● Thickness T2 (mm): 6.5 Applicable torque handle: T-100NT, DT085-15BN, DT135-15BN

[Specification 2]
-

[Material/Finish]
-

[Set contents/accessories]
-

[Caution] ● Do not insert the connector part of the torque handle into a plunger pin type. Please insert it into the steel ball type. ● When inserting a bolt or nut, align the mouth opening with the width across flats and insert it so that it hits the spring pin. ● Do not hang diagonally or shallowly.