VESSEL static electricity removal high power flexible nozzle HPF-1

[Features] ●For workpieces with a large amount of static electricity. ●With a flexible tube of 300mm, you can freely adjust the angle of the nozzle. ●Even in places where installation is difficult, by bending the tube and approaching, it is possible to pinpoint statically charged objects. ●Since compressed air can be used, dust and static electricity can be removed powerfully. ●The discharge needle made of titanium with low friction is adopted, and it exhibits stable performance for a long time. ●The high-voltage cable uses a flexible, highly durable silicone shielded cable. ●The dedicated high-voltage power supply UNIT (GP-1 4kV) has a built-in ion balance abnormality detection and automatic shutdown circuit. ●Equipped with a safety circuit that automatically stops output when a high voltage short circuit occurs.

[Applications] ● For static and dust removal of packaging machines, bag making machines, printers, and parts feeders.

[Specifications] ● Power supply (V): DC24V±10% ● Power consumption (mA): 90 ● Width (mm): 421.3 ● Depth (mm): 50 ● Height (mm): 40 ● Maximum air volume ([[M3 ]]/min): Maximum input pressure 0.4 MPa Noise level (dB): Approx. 95 (when input air pressure is 0.3 MPa)

[Specification 2] ● Static elimination method: AC CORONA discharge method ● Applied voltage/frequency: AC 3.5 kV/50 to 60 Hz ● Operating temperature/humidity: 0 to 45°C/10 to 80% RH (no freezing or condensation) ● Storage Temperature/Humidity: -10 to 50°C/10 to 80% RH (No freezing or condensation) Static elimination time: Approximately 1 second or less (input air pressure 0.3 MPa, distance 150 mm) Operating air pressure: 0.4 MPa (maximum Input pressure) ●Ion balance: GP-1 4KV side adjustable ●High voltage cable: Standard 3m, silicon shield cable ●Terminal connector: High voltage connector CON-4 ●Air connection: φ6mm tube compatible, one-touch fitting ●Nozzle diameter (mm) : 14.8 Diameter (mm): 14.8

[Materials/Finish] ● Nozzle tip cover: Stainless steel (SUS304) ● Discharge needle: Titanium ● Insulation material: Fluororesin ● Flexible tube part: STEEL Cr plating ● Air branch part: Aluminum

[Set contents/accessories]
-

[Note] ●High voltage power supply UNIT (GP-1 4 KV) is sold separately. ●Please use the high voltage power supply UNIT GP-1 4KV for 4Kv with this product. ●Be sure to read the instruction manual for safe use of the product. ●Be careful of condensation. Doing so may cause an electric shock or malfunction. Never use it in an area that requires an explosion-proof structure. ● Since high voltage is applied to the discharge needle, do not bring tools, metals such as wires, fingers, hands, or face close to it. ●As this product applies high voltage, do not expose it to water, oil, solvent, etc.