UNIONTOOL Carbide End Mill

[Features]
A long neck radius shape that is effective for high performance and high quality machining.
Stable processing is possible in both dry and wet processing.
Outer Diameter Tolerance: 0/-0.015 (D≤5), -0.005/-0.02 (D=6), Corner R Accuracy: R±0.005.

[Use]
Work Material: Pre-hardened Steel, Hardened Steel (~55HRC) (~60HRC) (~65HRC), Carbon Steel, Alloy Steel, Cast Iron, Copper.

【specification】
Blade diameter (mm): 0.8
Blade length (mm): 0.48
Total length (mm): 50
Shank diameter (mm): 4
Corner Radius (mm): 0.05
Effective length (mm): 2
Surface treatment: HARD MAX coating
Neck diameter (Φd1): 0.78
Outer diameter (D): 0.8
Shank taper angle (Bta): 16°
Surface treatment: HARD MAX coating

[Specification 2]
Torsion angle 30°
Made in an ISO9001 certified factory
Made in an ISO14001 certified factory
HARD MAX coating
4-Flute Long Neck Radius End Mill HLRS

[Material/Finish]
Cemented Carbide Fine Grain Alloy (SUPER TOOL MG)

[Set contents/accessories]
-

【caution】
The shank taper angle is a guideline.
If interference with the workpiece is required, be sure to measure and confirm.
Be careful of contact between the shank and the workpiece.