SUGATSUNE (170025670) HG-PA200-25 power assist hinge

[Features]●Torque can be adjusted by turning the adjustment screw. (±5%) ●The reaction force of the spring makes it possible to lightly lift the heavy lid. ●Damper closes the upper lid slowly and safely even if you release your hand. ●Attaching the resin cover hides the main unit and mounting holes, giving it a clean appearance.

[Applications] ● Heavy lids for semiconductor manufacturing equipment, analytical equipment, medical equipment, etc.

[Specifications] ●Total length (mm): 201 ●Width (mm): 150 ●Number of screw holes: 9 ●Thickness (mm): 42 ●Torque (N m): 25±10% ●Hole diameter (mm): 5.5 Torque peak angle (°): 20

[Specification 2] ●Outside mounting ●Operating temperature range: 0 to 40℃

[Material/Finish] - Base: Stainless steel (SUS430) - Resin cover: P Blind Tricot resin

[Set contents/accessories]
-

[Caution] ● Install the product so that the center of the shaft is horizontal and does not shift. ● Provide a separate stopper to prevent opening and closing beyond the movable angle. ●Do not use outdoors. ●When using the internal mounting specification, check the position of the torque adjustment screw so that the screw can be turned while attached to the housing and lid. ●If excessive force is applied in the direction of opening, a load will be applied to the product, so please prepare a separate stopper.