SANWA smart style 7-range digital insulation resistance tester

[Features]● Equipped with 7 ranges of insulation resistance, it is possible to set only the applied voltage to be used. ●Equipped with DC voltage, AC voltage, automatic discrimination function. ●MΩ is displayed both numerically and with an LED level meter. ●The position of the decimal point is fixed to prevent misreading. ●Equipped with a probe that can measure directly through the hole in the breaker cover. ●Equipped with an LCD backlight and an LED light that illuminates the measurement site. Compliant with international safety standard CAT.[3] 300V

[Applications] ● For equipment maintenance. ●For current measurement such as distribution boards. ●For battery inspection of electric vehicles.

[Specifications] ● Depth (mm): 29 ● AC voltage (V): 600 ● Height (mm): 139 ● Minimum display (MΩ): 0.01 ● DC voltage (V): 600 ● Rated measurement voltage (V/MΩ) ): 15/21, 25/21, 50/21, 100/110, 125/110, 250/110, 500/110 - Power supply: AAA alkaline batteries (LR03) x 4 (included) - Width (mm) : 91 Resistance (Ω): 999.9k

[Specification 2] ●Maximum display: 3999 counts ●DC/AC voltage (V): 600 (automatic detection) ●Continuity check: Buzzer sounds at 30Ω or less ●JIS C1302 compliant CE standards ●International safety standard CAT.[3] 300V Compliant ● Only the applied overvoltage range can be set arbitrarily ● Equipped with a discharge function

[Material/Finish]
-

[Set Contents/Accessories] ●Instruction manual ●Measurement probe TL-561 ●Alligator clip CL-561 ●Carrying case C-DG3a

[Caution] ● Do not use if the main unit, measurement probe, alligator clip, or ground lead is damaged. ● Do not use in locations where corrosive or explosive gases are present. ●Do not hold the tip of the measurement probe or alligator clip barrier during measurement. ●Connect the ground side (alligator clip) first, and then connect the power side (measurement probe). When disconnecting, separate from the energized side first. ●Do not switch to other functions during measurement.