MAX air impact driver HF-ID7P1

[Features] ● A high-pressure, Kosoku air impact driver. ● Equipped with a two-stage continuously variable throttle lever (trigger). ● Equipped with a rotation speed adjustment regulator. ● Equipped with a super hard steel ball.

[Applications] ● For tightening screws for woodworking.

[Specifications] ● Bit insertion port (mm): 6.35 ● Capacity screw dimensions (mm): 3.5 to 6.0 ● Maximum tightening torque (N m): 82 ● No-load rotation speed (min [[-1 power] ]): 9000 ● Air consumption ([[M3]]/min): 0.45 (1.0 MPa) / 1.1 (2.3 MPa) ● Hose mounting port: Rc1/4 ● Exhaust: Rear 360° variable ● Overall length (mm): 150 - Height x width x length (mm): 150 x 52 x 210 (mm) (excluding hook) - Air pressure used: 1.0 - 2.3 MPa (approximately 10 - 23 kgf/cm2) - Hose used: Inside diameter of MAX SUPER TOOL Air Hose 6mm or more, length within 30m

[Specification 2] ●Using air pressure: 1.0 to 2.3MPa ●Equipped with ultra-hard steel ball ●2 year warranty ●Capacity screw diameter: Woodworking screw φ3.5 to 6mm ●No-load rotation speed: 0 to about 9000min-1 ●Load Air consumption per hour: 450Nl/min.(at 1.0MPa) 1100Nl/min.(at 2.3MPa)

[Material/Finish]
-

[Set Contents/Accessories] Bit + No.2 x 65mm magnet, bit + No.2 x 150mm magnet, oil for both motor and hammer (ISO VG32), hex wrench 4mm

[Caution] ●The tightening torque is a reference value. The torque value changes depending on the conditions.