VESSEL high voltage power supply UNIT No. GP-1 4kV

[Features]
● High voltage UNIT for static electricity removal hyper series.
●A high voltage abnormality is detected by the abnormality detection circuit.
●The ion balance can be easily adjusted with the adjustment volume.

[Use]
-

【specification】
- Width (mm): 102.8
- Depth (mm): 233.5
- Height (mm): 114.2

[Specification 2]
●Operating temperature/humidity: 0 to 50°C/10 to 90% RH (no freezing or condensation)
Storage temperature/humidity: -30 to 70°C/10 to 90% RH (no freezing or condensation)
-Rated input voltage: DC24V±10%
●Variable output range without load (rms): AC output 4kV/DC output -150 to +550V
●Secondary short-circuit current: 5mA or less
●Output monitor: Output 1/1000V±5% of the output voltage to the monitor terminal
●Low voltage detection: When the output is about 85% or less of each output setting voltage, such as when the high voltage is shortened or when an abnormal spark occurs, an abnormality detection operation is performed.
● Power input connector: Molex 5569-04A1-210
-High voltage output connector: Ceramic high voltage output terminal (2 pieces)
●Alarm output terminal: C contact relay output

[Material/Finish]
- Housing: SPCC, white paint

[Set contents/accessories]
-

【Note】
●Be sure to read the instruction manual for safe use of the product.
●Be careful of condensation. Doing so may cause an electric shock or malfunction.
●Never use the product in an area that requires an explosion-proof structure.
● Since high voltage is applied to the discharge needle, do not bring tools, metals such as wires, fingers, hands, or face close to it.
●As this product applies high voltage, do not expose it to water, oil, solvent, etc.