Eagle horizontal sling clamp G-500kg (3-20)

[Features] ●Clamp suitable for lifting and lifting shaped steel. ●It can also be used for short faces such as I-shaped steel. ●Can be used for I-shaped steel with a face width of 100 mm.

[Applications] Horizontal lifting of shaped steel (angle steel, groove steel, I-shaped steel, H-shaped steel), steel frames, bridges, steel structures, steel plates, etc. ●For horizontal slinging, horizontal slinging, erection, transportation, lifting, pulling down (by using a reversing device, etc.), welding, assembly, mounting, press processing, and bending processing.

[Specifications] ● Basic working load (t): 0.1 to 0.5 ● Clamping range (mm): 3 to 20 ● Dimensions (mm) D: 25 ● Dimensions (mm) H: 225 ● Dimensions (mm) H2: 45 ● Dimensions (mm) L: 110 ● Maximum working load (t): 0.5 ● Working load (minimum to maximum) (kg): 100 to 500

[Specification 2] ●Latch-type locking device ●For 2-point hanging ●Manufactured in an ISO9001 certified factory

[Material/Finish]
-

[Set contents/accessories]
-

[Caution] ● Be sure to use at least 2 points. ●Never lift a load that exceeds the maximum working load of the clamp. ●Be sure to perform inspections before starting work, and do not use clamps that are malfunctioning, deformed, worn, or damaged. ●Be sure to read the instruction manual carefully before use.