Belt grinder with YODOGAWA dust collector FS series (low speed type) 3-phase 200V (0.4kW) 50Hz 50Hz

[Features]
●Equipped with a high-performance dedicated cartridge filter.
●The highly operable shaking device, which is indispensable for maintaining performance, is equipped as standard.
●The dust collection cover can be disassembled and opened/closed in two stages with a single touch, taking into consideration workability and maintainability.
● Japan Industrial Machinery Manufacturers Association "Excellent Pollution Control Device Promotion Council Certified Registration Number 0208" product.
●This product complies with the RoHS Directive.
●Equipped with a high-performance non-woven fabric filter that maintains its capacity for a long time and does not easily clog (99.99% collection efficiency of 5 μm or more). The filter can be reused after being washed with water or brushed to save energy.
● Short-time maintenance is realized by a simple UNIT method that does not require tools.
●It is possible to make a special order and support different voltages from 1 unit.

[Use]
●For polishing, grinding, and processing of soft materials and weak heat materials (non-ferrous metals, wood, plastics, etc.).

【specification】
- Width (mm): 680
- Grinder output: 0.4kW x 4P
- Belt dimensions (mm): 100 x 915
- Belt speed (m/min): 520/620
-Dust collector output (W): 400
Power supply (V): three-phase 200
●Number of revolutions (rpm) (50/60Hz): 1500/-
-Power cord length (m): 3 (tip crimp terminal only)
● Number of installed filters (sheets): 1
Dust removal method: manual

[Specification 2]
● Opening surface control wind speed 5m or more (when new)
● Supports different voltages from one unit
●Number of filters installed: 1
-Body dimensions (mm) width x depth x height: 680 x 424 x 830

[Material/Finish]
-Body: Steel plate (in-house designed motor)
● Filter: polyester molded non-woven fabric
● Grinder: Casting frame (in-house designed motor)

[Set contents/accessories]
- Polishing belt (#80 x 1, attached to the main unit)

【Note】
Separate fare
●Cannot be used for materials that may cause dust explosions, such as aluminum, magnesium, and titanium.
●Please specify 50Hz or 60Hz when ordering.