CHIYODA Five different diameter union tee 6mmX4mm (2 places)

[Features] ● Uses flame-retardant PBT resin. and prevent fire spread accidents such as spatter. - Plating specification ... metal parts are nickel plating specification. ● All-plastic fittings: The first lightweight general-purpose pneumatic fittings.

[Applications] ●Various air and water piping.

[Specifications] ● Applicable tube outer diameter D1 (mm): 6 ● Applicable tube outer diameter D2 (mm): 4 x 4 ● Working fluid: air, water ● Applicable tubing: TE, TP, MTP polyurethane tubing, TN type nylon tubing ● Tube outer diameter φD1 (mm): φ6 ● Tube outer diameter φD2 (mm): φ4

[Specification 2] ● Operating temperature range (air): -5 to 60°C (23 to 140°F) (air) ● Operating temperature range (water): 5 to 40°C (41 to 104°F) (water) Maximum working pressure: 1MPa (10kgf/[[CM 2]]) (air) Maximum vacuum pressure: 10Torr (-100kPa)

[Materials/Finish] Body: Flame-retardant polybutylene terephthalate (PBT) Seal rubber: Nitrile rubber (NBR)

[Set contents/accessories]
-

[Caution] ● Cut the tube at a right angle using a special cutter (TC-16), etc., so that the cut surface is not deformed. ● Fully insert the joint to the end. ●After connecting, lightly pull the tube to check that it is not loose or disconnected. ● Maintain the slack of the tube and install it with sufficient margin. ●Install the tube with the minimum bending radius or more, and avoid bending at the mouth of the fitting.