Double-ended grinder with YODOGAWA dust collector FG series 3-phase 200V (for grindstone diameter 150Φ)

[Features]
●The dust collector is designed to minimize the installation area and the motor does not protrude to the rear.
●Equipped with a high-performance dedicated cartridge filter.
●The highly operable shaking device, which is indispensable for maintaining performance, is equipped as standard.
●Maintenance such as operation of the grinder and dust disposal is centralized to the front, and a highly operable shaking device that is indispensable for maintaining performance is equipped as standard.
● Japan Industrial Machinery Manufacturers Association "Excellent Pollution Control Device Promotion Council Certified Registration Number 0208" product.
●Equipped with a high-performance non-woven fabric filter that maintains its capacity for a long time and does not easily clog (99.99% collection efficiency of 5 μm or more). The filter can be reused after being washed with water or brushed to save energy.
● Short-time maintenance is realized by a simple UNIT method that does not require tools.
●It is possible to make a special order and support different voltages from 1 unit.

[Use]
●For processing and polishing metal materials, resin materials, and products.

【specification】
Power supply (V): three-phase 200
-Grindstone dimensions (mm) (outer diameter x thickness x hole diameter): 150 x 16 x 12.70
●Number of revolutions (rpm) (50/60Hz): 3000/3600
● Grinder output: 0.2 kW
-Dust collector output (W): 400
- Width (mm): 620
- Depth (mm): 344
- Height (mm): 986
- Cord length (m): 3
●Number of revolutions (rpm) (50/60Hz): 3000/3600
-Power cord length (m): 3 (tip crimp terminal only)
● Number of installed filters (sheets): 2
Dust removal method: manual

[Specification 2]
● Opening surface control wind speed 5m or more (when new)
● Supports different voltages from one unit
- Number of installed filters (sheets): 2
-Body dimensions (mm) width x depth x height: 620 x 344 x 986
Grindstone maximum peripheral speed (m/s): 28

[Material/Finish]
●Dust collector body: Made of iron plate In-house designed motor Grinder: Aluminum casting frame and in-house designed motor
● Filter material: polyester molded non-woven fabric

[Set contents/accessories]
- Whetstone (2 pieces)
*Whetstone type: A36/A60P each 1 piece

【Note】
Separate fare
●You cannot use a grindstone with a maximum usable peripheral speed that is lower than the maximum peripheral speed of the grindstone of this machine.
●Cannot be used for materials that may cause dust explosions, such as aluminum, magnesium, and titanium.