Buff grinder with YODOGAWA dust collector FB series Applicable buff diameter 305Φ Three-phase 200V (1.5kW, Kosoku type) 60Hz 60Hz

[Features]
●The dust collector is designed to minimize the installation area and the motor does not protrude to the rear.
●Equipped with a high-performance dedicated cartridge filter.
●The highly operable shaking device, which is indispensable for maintaining performance, is equipped as standard.
●The dust collection cover can be disassembled and opened/closed in two stages with a single touch, taking into consideration workability and maintainability.
● Japan Industrial Machinery Manufacturers Association "Excellent Pollution Control Device Promotion Council Certified Registration Number 0208" product.
●Equipped with a high-performance non-woven fabric filter that maintains its capacity for a long time and does not easily clog (99.99% collection efficiency of 5 μm or more). The filter can be reused after being washed with water or brushed to save energy.
● Short-time maintenance is realized by a simple UNIT method that does not require tools.
●It is possible to make a special order and support different voltages from 1 unit.

[Use]
●For polishing and buffing of machine parts.

【specification】
Power supply (V): three-phase 200
-Grinder output: 1.5kW x 2P
-Dust collector output (W): 750
- Cord length (m): 3
- Depth (mm): 444
●Number of revolutions (rpm) (50/60Hz): 3000/3600
- Height (mm): 1140
- Width (mm): 700
●Rotation speed (rpm) (50/60Hz): -/3600
-Power cord length (m): 3 (tip crimp terminal only)
● Number of installed filters (sheets): 2
Dust removal method: manual
Grindstone dimensions (mm) (outer diameter x thickness x hole diameter): 305 x 44 x 25.40

[Specification 2]
- Applicable buff dimensions (mm) (outer diameter x thickness x hole diameter): 305 x 44 x 25.4
● Supports different voltages from one unit
● Number of filters installed: 2
-Body dimensions (mm) width x depth x height: 700 x 444 x 1140

[Material/Finish]
-Body: Steel plate (in-house designed motor)
● Filter: polyester molded non-woven fabric
● Grinder: Casting frame (in-house designed motor)

[Set contents/accessories]
●None

【Note】
Separate fare
●This is a dedicated buffing machine. Please do not use the whetstone as it is extremely dangerous.
●Cannot be used for materials that may cause dust explosions, such as aluminum, magnesium, and titanium.
●Please choose the buff according to your work. It is not included with this machine.
●Please specify 50Hz or 60Hz when ordering.