Electric handy pump for AQUA SYSTEM high viscosity (100V) Oil Oil

[Features]● Can be used at high places or long horizontal pulls because it is pushed out with high discharge pressure. ●Please note that the pump is rated for 20 minutes, and if it is used longer than that, the motor may seize and malfunction. ●As this pump is for oil only, it cannot be used for other liquids (kerosene, light oil, solvents, etc.). Please note that if you use it, it will not be covered by the warranty.

[Applications] ●For transfer of gear oil and engine oil (2500 cP or less). (EV-100H is 1000cP or less)

[Specifications] - Discharge rate (L/min): 15 - Lifting height (m): 30 - Power supply (V): AC100 - Power cord: 5.5m (with outlet) - Current (A): 10.5 - Ability: (ISO32 operation Oil) 15 L/min (2500 cp oil) 10 L/min Discharge rate (when using ISO32): 15 L/min Usable viscosity (cP): 2500 or less Maximum discharge pressure: 0.45 MPa Caliber (intake/discharge): Rc1 /Rc3/4

[Specification 2] Rated operating time: 20 minutes

[Materials/Finish] Wetted parts: Aluminum, iron Packing: Nitrile rubber (NBR)

[Set contents/accessories]
-

[Caution] ●Continuous operation is not possible because the motor may burn out. ●Please use within the rated time of 20 minutes. ●Outlet plug not included ●Battery not included.