ULVAC single phase 100V DAIA type dry vacuum pump

[Features]● The ultimate pressure performance of DAIA type vacuum pump has been further pursued. ●Three-stage piping of multiple pump heads achieves ultimate pressure that cannot be obtained with a normal DAIA type. ●This is a chemical type high-vacuum type DAIA vacuum pump that uses highly corrosion-resistant parts such as PTFE in the gas-contacting parts.

[Applications] ● Back pump for wide-area turbo molecular pumps, cryopump exhaust systems, and mechanical booster pumps. ●Vacuum concentration, vacuum filtration, centrifugation, rotary evaporator, etc. ●Medical equipment, pharmaceutical equipment, analytical equipment, physics and chemistry equipment, etc. ● Special gas replacement. ●Vacuum drying equipment, freeze vacuum drying equipment.

[Specifications] - Ultimate pressure (Pa): 200 - Exhaust speed (L/min) 50/60Hz: 20/23 - Inlet diameter (mm): 10 - Power supply (V): Single phase 100 - Power consumption (W): 80 ● Width (mm): 161 ● Depth (mm): 327 ● Height (mm): 217 ● Exhaust speed (L/min): 20/23 ● Noise level (dB): -

[Specification 2] ●With thermal protector ●Chemical type ●High vacuum type ●Ultimate pressure (KPa): 0.2 ●Suction and exhaust pipe diameter (mm): ODφ10×IDφ6 (Rc1/8) ●Maximum dimension (mm): 161 (W ) x 327 (L) x 217 (H) ●Power cord length: 1.8m

[Material/Finish]
-

[Set contents/accessories]
-

[Caution] ● If moisture, dust, corrosive gas, etc. are mixed in the suction gas, it is necessary to remove them.