[Features] Safely transport flammable liquids. By installing a valve at the outlet of the material piping, it is possible to start/stop and adjust the flow rate simply by opening and closing the valve. The self-priming type eliminates the need for priming and can efficiently pump out air-entrained liquids. There is no sliding part (shaft seal) in the wetted part of the pump, and it has excellent slurry resistance. The maximum discharge pressure is approximately 0.7 MPa, and transfer to high or distant locations is possible. It can be changed by adjusting with an air regulator. No special anti-explosion measures are required as it is driven only by compressed air from the compressor. Since there is no heat generation due to overloading, it can be used safely and safely even in explosion-proof areas.
[Use] Conveyance of liquid materials containing abrasive elements. Pumping liquid materials at high pressure. Adjustment of discharge pressure. Adjustment of the valve flow rate at the site of use, first stop.
