[Features] ● Corrosion- and oil-resistant pump to be attached to an electric drill. ●Can be attached to drill drivers and drill chucks with one touch, and does not slip or spin.
[Use] ●For transfer, water supply and drainage of water and sewage.
[Specification 2] Pumping volume: 10 to 12 L/min (in the case of 1600 min [[-1 power]]) ● Applicable hose inner diameter: 15mm - Chuck mounting shaft shape: 6.35 mm across flats (hexagonal shaft) Appropriate water temperature: 5-50℃
【Note】 ● Do not run the product without liquid, as it may cause malfunction. ● Do not use liquids such as highly volatile mixed oils, petroleum (kerosene, light oil, heavy oil), gasoline, thinner, liquids with strong cleaning power, and liquids with strong acidity. ● Do not use lubricating oil with high viscosity. Can be used for lubricating oils with low viscosity within ISO VG32. ●Do not use water containing fine sand or gravel that has sunk to the bottom such as well water or puddles. The rubber rotor may be scratched and damaged during rotation.
regular price
¥0
Selling price
¥0
regular price
Salesold out
unit price
/Around
tax included
Use the right and left arrows to navigate the slideshow, or swipe left or right if using a mobile device
Selecting a selection results in a full page refresh.
Press the spacebar and then the arrow keys to select.