ULVAC DAP-6D single-phase 200V DAIA type dry vacuum pump pumping speed 6/7

[Features]
●A vacuum pump that exhausts air using the reciprocating motion of a rubber thin film (DAIA).
●This is a dry vacuum pump that does not use oil or water in the wetted parts.
● Built-in thermal protector for safety.
●Simple structure and easy maintenance.

[Use]
● Adsorption transfer, adsorption fixation, vacuum tweezers.
● Analytical equipment, physics and chemistry equipment.
●Semiconductor inspection equipment.
● Device assembly.
●Automatic and packaging machines.

【specification】
●Exhaust speed (L/min) 50/60Hz: 6/7
Ultimate pressure (Pa): 6.65 x 10 [[cubic]]
- Intake port diameter (mm): Rc1/8
Power supply (V): Single phase 200
●Noise level (dB):-
- Overall width x total length x total height (mm): 91 x 163 x 100.6

[Specification 2]
●With thermal protector
- Supports different voltages from one unit (excluding DAL-181D/DAL-361S)
For low speed and low pressure

[Material/Finish]
-

[Set contents/accessories]
-

【Note】
●When restarting the pump after it has stopped, it may not restart if the inside of the pump is in a vacuum state.
●If the pressure inside the pump is returned to atmospheric pressure, it will restart.
● If moisture, dust, corrosive gas, etc. are mixed in the suction gas, it is necessary to remove them.