Sekisui corner pasting machine Workmate 71 for H pasting

[Features]
●By combining with an I-pasting machine such as Workmate 01/51, H-pasting is possible. (Work Mate 71 alone cannot perform H-sticking. A separate I-sticking and sealing machine is required in the previous process.)
●This is a sealing machine that applies tape to the top and bottom edges of cardboard.
●Equipped with a sequencer/inverter as standard equipment.

[Use]
-

【specification】
Power supply (V): three-phase 200
Power consumption (kW): 0.75
- Tape width (mm): 38-50
●Processing capacity: 10 cases/min (at 60Hz, depending on supply speed and size)
- Body dimensions (mm) depth: 1280
- Body dimensions (mm) height: 1700
- Body dimensions (mm) width: 2030

[Specification 2]
-Minimum processable size (width x depth x height after box making): 300 x 250 x 250 mm
-Maximum processable size (width x depth x height after boxing): 600 x 600 x 600 mm (May not be possible depending on the combination.)
- Table height: 700 (± 50) mm
●Air source: 0.5MPa 100NL/min

[Material/Finish]
-

[Set contents/accessories]
-

【Note】
-