MCC Conduit Machine CM 82

[Features]
●Thread cutting of bent pipes can be easily done with a special machine for electrical conduits that does not move the pipe and the die head rotates.
●Spindle rotation speed varies widely from about 18rpm to 110rpm according to the load, and optimum rotation can be obtained.
● Kosoku of 110 revolutions per minute (at no load) can perform three times as much work as before.
●Since cutting oil comes out from inside the die head, cutting oil does not scatter.
●Simply set the lever fixing base at the specified position to cut a screw of any length, and the die head opens automatically when the screw is turned up.
●Equipped with a chip cover to prevent chips from scattering.
●Since the die head can be removed with one touch, the size can be easily changed.

[Use]
-

【specification】
-Threading capacity (A): Thick steel PF (1/2 to 3), thin steel C (15 to 75)
- No-load rotation speed (rpm): 40, 110
Power supply (V): AC100
-Power cord length (m): 2.4
Power consumption (W): 750
● Standard attached die head: CMDA004, CMDB008
●Standard attached chaser: PF1/2～3/4, 1～1 1/2, 2～3, C19～31, 39～51, 63～75
- Width (mm): 460
- Depth (mm): 350
- Height (mm): 280

[Specification 2]
● Carbon brush part number: P1433254S
- Motor: Series

[Material/Finish]
-

[Set contents/accessories]
-

【Note】
-