SANWA digital multimeter with backlight

[Features]● Equipped with data hold, range hold, and relative value measurement functions. ●Large liquid crystal display with backlight function. ● Safe design with high breaking capacity (30kA) fuse. ● CE standard product. ●The outer circumference of the main unit is made of elastomer that is resistant to impact. ●Equipped with a current measurement terminal with a safety cap. - Maximum display: 4000 counts

[Use] ●For maintenance of equipment. ●For research and development. ●For electronic work. ●For checking the performance of electronic components.

[Specifications] ● Depth (mm): 44 ● AC voltage (V): 1000 ● AC current (A): 10 ● Height (mm): 166 ● DC voltage (V): 1000 ● DC current (A): 10 ● Resistance (Ω): 40M ● Power supply: AA batteries (R6) x 2 (included) ● Width (mm): 82 ● Width x depth x height: 82 x 44 x 166 mm ● Continuous use time: about 400 hours

[Specification 2] ●Maximum display: 4000 counts ●Equipped with 30KA high breaking capacity fuse ●Continuity check function with LED lighting ●1.5V battery check ●CE standard product ●Battery life 400 hours

[Material/Finish]
-

[Set Contents/Accessories] ●Test lead ●Test lead (TL-23a) ●Instruction manual

[Caution] ● Do not use if the main unit or test leads are damaged. ● Do not hold the test pin side of the test probe by its collar during measurement. ●Connect the ground side (black test lead) first, and then connect the energized side (red test lead). When disconnecting, disconnect the energized side first. ●Do not switch to other functions or ranges or replace the test lead plug with other measurement terminals during measurement. ●Use a fuse of the specified shape and rating.