SANWA digital multimeter Dark Canyon / AC up to 600V

[Features] ● Double-molded elastomer resin is used for the outer periphery, which is resistant to impact. ●Equipped with data hold, range hold, and relative value measurement functions. ● CE standard product. ●The outer circumference of the main unit is made of elastomer that is resistant to impact. ●Equipped with a current measurement terminal with a safety cap.

[Use] ●For maintenance of equipment. ●For research and development. ●For electronic work. ●For checking the performance of electronic components.

[Specifications] ● Depth (mm): 44 ● AC voltage (V): 600 ● AC current (A): 0.4 ● Height (mm): 166 ● DC voltage (V): 600 ● DC current (A): 0.4 - Resistance (Ω): 40M - Power supply: AA batteries (R6) x 2 (included) - Width (mm): 82 - Width x depth x height: 82 x 44 x 166 mm - Continuous use time: about 400 hours

[Specification 2] ●Maximum display: 4000 counts ●Elastomer is double-molded to resist shock ●Frequency measurement corresponding to zero-cross signal ●CE standard product ●Battery life 400 hours

[Material/Finish]
-

[Set Contents/Accessories] ●Test lead ●Test lead (TL-21a) ●Instruction manual

[Caution] ● Do not use if the main unit or test leads are damaged. ● Do not hold the test pin side of the test probe by its collar during measurement. ●Connect the ground side (black test lead) first, and then connect the energized side (red test lead). When disconnecting, disconnect the energized side first. ●Do not switch to other functions or ranges or replace test lead plugs with other measurement terminals during measurement. ●Use a fuse of the specified shape and rating.