NITTO circuit beveler (pneumatic) CB-01

[Features]
It is possible to chamfer a pilot hole of 6.8 mm for an M8 screw.
Small and lightweight type.
Uses a throwaway tip (3 sides can be used) that achieves a smooth finished surface.

[Use]
chamfering work.

【specification】
No-load rotation speed (min [[-1st power]]): 28000
Air consumption ([[M3]]/min): 0.15
Hose attachment port: Hi coupler 20PM
Chamfering ability: mild steel 0-1C, stainless steel 0-0.5C
Chamfering angle (°): 45
Total length (mm): 86
No-load speed (rpm): 28000

[Specification 2]
Working air pressure: 0.6MPa
Minimum plate pressure (mm): 1.5 (maximum chamfering amount 0.5C at 1.5mm)
Minimum corner radius (mm): 3R
Minimum processing diameter (mm): 6.8
Minimum chamfer depth (mm): 6

[Material/Finish]
-

[Set contents/accessories]
Tip (8.4 triangle) x 2

【Note】
-