YUKO flex horn #LA1000 BC-29-LA LA10

[Features]
It has a structure in which a ball made of sintered artificial abrasive grains is attached to a fiber resin leg protruding from the shaft.
The feet are made of nylon resin and are highly elastic, so it is possible to polish burrs on the inner surface of workpieces and the inner surface of uneven workpieces.

[Use]
Deburring and polishing of cast iron, carbon steel, hardened iron, etc.
Relatively hard SC (silicon carbide) work material (cast iron, carbon steel, quenched iron, etc.)
AO (alumina oxide) relatively soft workpiece Mainly for deburring #240, 320, 600, mainly for polishing equivalent to #1000 (for mirror finish) (#20) , #40, #80, #400, and #800 are available as special orders.)
Tools used: air drill, electric drill (3-speed), drill press.

【specification】
Total length (mm): 203
Applicable inner diameter (mm): 27.0 to 30.0
Abrasive: Rubigate Alumina
Shaft diameter (mm): 6.3
Abrasive grain length (mm): 76

[Specification 2]
Maximum operating speed: 300-1200rpm
The working time varies depending on the material of the workpiece and the purpose of use, but as a guideline, it should be 10 to 20 seconds.
Grinding fluid uses aqueous solution (soluve type) or spindle oil

[Material/Finish]
Shaft: galvanized wire

[Set contents/accessories]
-

【caution】
-