MAX air impact driver AT-ID6P1

[Features]
● Equipped with a two-stage continuously variable throttle lever (trigger).
● Equipped with a rotation speed adjustment regulator.
●It is an air impact driver that reduces work loss with stable and reliable tightening.
●Reduced bit dropout.

[Use]
●For tightening screws and bolts.

【specification】
- Bit slot (mm): 6.35
- Ability screw dimensions (mm): 3.5 to 6.0
- Maximum tightening torque (N m): 40
No-load rotation speed (min [[-1 power]]): 7800
● Air consumption ([[M3]]/min): 0.28
- Hose mounting port: Rc1/4
- Exhaust: Rear 360 ° variable
- Total length (mm): 150
- No-load rotation speed (rpm): 7800

[Specification 2]
● Working air pressure: 0.49 to 0.78 MPa
- Width variable hook (PAT.P)
●Reduced falling out of bits
Equipped with a two-stage continuously variable throttle lever (trigger)
-Screw for woodworking Φ3.5-6mm -Bolt for woodworking ΦM5-M12
●Width variable hook.

[Material/Finish]
-

[Set contents/accessories]
- With bit + No.2 x 65mm magnet, with bit + No.2 x 150mm magnet, HAMMER CASTER oil (ISO VG32), motor oil (ISO VG10), hex wrench (5/32)

【Note】
●The tightening torque is a reference value. The torque value changes depending on the conditions.