ANEX electrical work torque adapter М4 1.4N・m

[Features]●Prevents over-torque with set torque. ●Ideal for screw tightening of switchboards. ●Double-ended and single-ended bits with a total length of 35 mm or less can be used. - It can be attached to a replaceable handle or a drill driver (7.2V or less recommended).

[Applications] ● For screw tightening torque management of switchboards, etc.

[Specifications] ●Bit slot width across flats (mm): 6.35 ●Capacity (N・m): 1.4 ●Compatible screw size: M4

[Specification 2] Shank diameter: 6.35mm

[Material/Finish] Carbon steel, piano wire, aluminum alloy, neodymium magnet

[Set contents/accessories]
-

[Caution] ●Regarding the setting torque: Based on the screw tightening work of the switchboard. ●Please note that even if the screw size is the same, the set torque will differ depending on the conditions of use. ● When using an electric screwdriver: We recommend rotating the electric screwdriver at 250 rpm or less. ●Some electric screwdrivers may not reach the set torque, so be sure to manually tighten the screw after turning it. ●When loosening screws (reverse rotation): Excessive torque may damage the product, so be careful not to loosen screws that have been tightened by other than this product.