Sanko Techno ALC drive ALD type stainless steel pack product

[Features]●Performs drilling, tapping, and mounting in one process. ●By adopting a special screw thread with a wide pitch, it can be installed smoothly on ALC panels and exhibits a stable and high holding power. ●Complete construction is possible even on corners and edges.

[Applications] ●For ALC panels, wiring, piping saddle fastening, interior substrate mounting, lighting equipment mounting, information board mounting, etc.

[Specifications] ● Nominal diameter d (mm): 5.0 ● Head diameter (mm): 9.6 ● Embedding depth (mm): 50 ● Maximum tensile load (kN): 0.8 ● Length (mm): 60 ● Neck Lower length (mm): 60 Head height (mm): 2.9

[Specification 2] ● Compatible screwdriver: Phillips No. 2 (No. 3 only for 865 and 890) ● Package included

[Material/Finish] Stainless steel (SUSXM7)

[Set contents/accessories]
-

[Note] ●Maximum tensile load is the value of ALC panel (100mm thickness) compression strength Fc=4N/mm2. ●Do not drill a pilot hole, but directly install. ●When using a driver drill, pay attention to the tightening torque (nominal diameter 5: 1.5 to 2.2 N・m).