DAIKIN oil cooler

[Features]
●It is an oil cooling device with a built-in circulation pump (air-cooling type) that can control the oil temperature with high accuracy (±0.1℃).
●With a wide range of cooling capacity control (5 to 100%), temperature control in the low load range is possible.
●A high energy-saving rate is achieved by adopting a unique IPM motor and new refrigerant R410A. (Electricity cost reduced by about 20% compared to DAIKIN 's non-inverter machine)
●It is now possible to easily warm up up to 99 hours.
● Auto-tuning function.
●An alarm signal is output when refrigerant gas leaks (cooling is not possible).

[Use]
● Hydraulic oil cooling: Temperature (viscosity) management.
●Cooling oil cooling: Peripheral cooling of the built-in motor.
● Lubricating oil cooling: Cooling inside the gearbox.

【specification】
- Cooling capacity (kW) (50/60Hz): 5.0/5.6
-External dimensions (mm): 1110 x 470 x 560
- Noise level (dB): 65
- Outer diameter (mm): 1110 x 470 x 560
●Oil pump discharge rate (50/60Hz) (L/min): 30/36.0

[Specification 2]
-

[Material/Finish]
-

[Set contents/accessories]
-

【Note】
-