Pisco mold temperature control joint straight 08 type tube 8MM screw R1/4

[Features]●The connecting part (plug) and the screw part (socket) can be separated. The mold can be processed in advance according to the screw size, the screw part is embedded using a hexagonal wrench, and the connection part can be connected by simply inserting it later. In addition, when detaching, the release sleeve is pushed and the joint is removed, leaving no protrusions on the mold. ●Built-in stop valve type allows safe attachment and detachment of joints. (Hot water is not spilled when attaching/detaching the joint.)

[Use]
-

[Specifications] Port size: R1/4 Compatible tube outer diameter D (mm): 8 Width across flats (mm): 6 Fluids used: Air, water (conditions apply), thermal oil

[Specification 2] ● Operating temperature range: 0 to 60°C (air), 0 to 99°C (water), 0 to 120°C (thermal oil) (no freezing) ● Maximum working pressure: 0.9 MPa

[Material/Finish] ●Body: Brass + electroless nickel plating ●Seal rubber: Hydrogenated nitrile rubber (HNBR)

[Set contents/accessories]
-

[Caution] ● When using water or heat medium oil, be sure to observe the following conditions. : 1. When using water or thermal oil, keep the surge pressure below the maximum operating pressure. 2. Be sure to use an insert ring when using water or thermal oil.