KOGI Air Amplification Nozzle Flow Trans Vector 907

[Features]
●Ambient air is drawn in, enabling a large volume air blow.
●It can blow about 2 to 20 times more air volume depending on the model.
●Wide-angle nozzle (full-angle 15°) is good at blowing over a wide area.
●Approximately 10 dB (A) lower than the blow noise of a copper tube.
●Flexible nozzle type.

[Use]
Blow: chips, cleaning, smoke, draining

【specification】
●Nozzle mounting port: NPT-1/8
● Working air pressure (MPa): 0.29 to 0.69
- Total length (mm): 304.8
● Maximum operating pressure: 1 MPa
● Air consumption (NL/min): 171 to 345

[Specification 2]
Applicable fluid: Compressed air (compressor air)
● Soft blow
●Flexible nozzle type

[Material/Finish]
●Rubber hose

[Set contents/accessories]
-

【Note】
●Use clean compressed air.