KOGI Air Amplification Nozzle Large Trans Vector 905

[Features]
●Induces and sucks the surrounding air, enabling a large volume air blow.
●The amplification ratio is 1:12. (0.69MPa)
●Wide-angle nozzle (full-angle 15°) is good at blowing over a wide area.
●Capacity can be adjusted by increasing or decreasing the number of built-in gaskets.

[Use]
● Air blow: chips, cleaning, smoke
● Conveyance: Foam material, waste paper, food materials, capsules, powder
Suction: chip collection, hole cleaning, exhaust, smoke exhaust
● Drainage: Various rod shapes (passing through the inner diameter)
Suction + blow: chemical spray

【specification】
- Nozzle diameter (mm): φ203
- Nozzle mounting port: Rc-3/4
● Working air pressure (MPa): 0.29 to 0.69
- Total length (mm): 442
● Maximum operating pressure: 1 MPa
● Air consumption (NL/min): 1660 to 3360
- Minimum diameter (mm): φ127
-Amplification ratio (0.69MPa): 1:12

[Specification 2]
Applicable fluid: Compressed air (compressor air)

[Material/Finish]
●Aluminum

[Set contents/accessories]
-

【Note】
●Use clean compressed air.