KOGI Air Amplification Nozzle Transvector Stainless Steel 903XSS

[Features]
●Induces and sucks the surrounding air, enabling a large volume air blow.
●It can blow about 2 to 20 times more air volume depending on the model.
●Wide-angle nozzle (full-angle 15°) is good at blowing over a wide area.
●Adjustment by scale is possible.

[Use]
Blow: chips, cleaning, smoke, draining
Suction: chip collection, hole cleaning, exhaust, smoke exhaust
●Conveyance: amount of foam material, waste paper, food materials, pharmaceuticals, powder
● Drainage: Various rod shapes (passing through the inner diameter)
Suction + blow: chemical spray

【specification】
- Nozzle diameter (mm): φ50
● Nozzle mounting port: NPT-3/8
- Outer diameter (mm): Maximum Φ69.8
● Working air pressure (MPa): 0.29 to 0.69
- Total length (mm): 97.1
● Maximum operating pressure: 1 MPa
● Air consumption (NL/min): 350 to 708 (when slit width is 0.05 mm)
- Minimum diameter (mm): φ40

[Specification 2]
Applicable fluid: Compressed air (compressor air)

[Material/Finish]
●Stainless steel

[Set contents/accessories]
-

【Note】
●Use clean compressed air.