KOGI Air Amplification Nozzle Transvector Jet 901BA

[Features]● Attracts and sucks the surrounding air, enabling a large volume air blow. ●It can blow about 2 to 20 times more air volume depending on the model. ●Wide-angle nozzle (full-angle 15°) is good at blowing over a wide area. ●Capacity can be adjusted by increasing or decreasing the number of built-in gaskets.

[Applications] - Blow: Chips, cleaning, smoke, draining - Suction: Chip collection, hole cleaning, exhaust, smoke exhaust - Conveyance: Amount of foam material, waste paper, food materials, pharmaceuticals, powder - Draining: Various rod shapes ( passes through the inner diameter) Suction: robot hand Suction + blow: chemical spray

[Specifications] Nozzle diameter (mm): φ19 Nozzle mounting port: NPT-1/8 Outer diameter (mm): Maximum Φ33.8 Working air pressure (MPa): 0.29 to 0.69 Total length (mm): 63 ●Maximum operating pressure: 1MPa ●Air consumption (NL/min): 126 to 254 ●Minimum diameter (mm): φ10

[Specification 2] Applicable fluid: Compressed air (compressor air) Minimum diameter 10mm

[Material/Finish] Aluminum

[Set contents/accessories]
-

[Caution] ● Use clean compressed air.