KOGI Air Amplification Nozzle Flow Trans Vector 900

[Features]●Ambient air is attracted, and a large volume air blow is possible. ●It can blow about 2 to 20 times more air volume depending on the model. ●Wide-angle nozzle (full-angle 15°) is good at blowing over a wide area. ●Approximately 10 dB (A) lower than the blow noise of a copper tube. ●The scale can be adjusted. (900, 900SS only)

[Applications] Blow: chips, cleaning, smoke, draining

[Specifications] Nozzle mounting port: NPT-1/8 Working air pressure (MPa): 0.29 to 0.69 Total length (mm): 48 Maximum working pressure: 1 MPa Air consumption (NL/min): 185 to 375 (at scale 6) Air consumption (NL/min): 263 to 532 (at scale 10)

[Specification 2] Applicable fluid: Compressed air (compressor air)

[Material/Finish] Aluminum

[Set contents/accessories]
-

[Caution] ● Use clean compressed air.