Fisher concrete screw type anchor F BS 2 6 x 40/5 US (100 pieces)

[Features]
A screw-in type high-strength anchor that does not require driving.
Can be set with an impact wrench.
It is easy to remove after casting and can be used for temporary construction.
It has a serrated shape that cuts quickly into concrete holes.
A non-expanding anchor that can reduce the anchor distance and edge distance.
It can be reused by using a dedicated check gauge.
This ETA rating applies to applications similar to European seismic C1 and C2.

[Use]
For concrete and dense stone.
For mounting on various frames.
For facility construction.
For handrail exterior construction, etc.
For plain concrete and dense masonry.
Because it is removable, it can be used for temporary fixing.

【specification】
Nominal Thread: M6
Overall length (mm): 40
Thread length (mm): 40
Maximum attachment thickness (mm): 15
Drill diameter (mm): 6
Standard installation torque (N・m): 5
Maximum tensile load (kN): 3.1
Maximum shear load (kN): 4.3
Effective embedded depth (mm): 35
Width across flats (mm): 10
Embedded depth (mm): 25 to 35
Pilot hole diameter (mm): 6
Drilling depth (mm): 50
Allowable Safe Load (kN): 3.1
Allowable shear load (kN): 4.3

[Specification 2]
Boxed
European Technical Assessment: ETA-15/0352

[Material/Finish]
steel
Surface treatment: galvanized

[Set contents/accessories]
-

【caution】
The allowable safe load is the safety factor obtained by multiplying the maximum tensile load by the safety factor.