STAR-M drill stand RULO

[Features]
●The angle can be freely adjusted.
●It is possible to attach a drill with a size of 57 mm or less, a total length of 220 mm or less, and a shaft diameter of 1.5 mm to 13 mm.

[Use]
●For 90 degree vertical holes, round bar processing using V grooves, center holes in rectangular timbers, slanted holes, holes for dowel joints with a certain depth, and wood plugs.

【specification】
● Applicable drill: drill diameter 57 mm or less, total length 220 mm or less, shank diameter 1.5 to 10 mm
- Shaft diameter (mm): 10 three grooves
- Total length (mm): 367.5
- Width (mm): 198

[Specification 2]
●13mm drill chuck
● Maximum stroke 220mm
● Maximum tilt angle 45 degrees
-Compatible models: electric drill

[Material/Finish]
-Aluminum DAIKI

[Set contents/accessories]
●Chuck key holder
● Chuck

【Note】
●The angle scale is a guideline.
●Firmly fix the main unit base with a clamp or by hand.
●Please be aware that the main unit may tip over if it is placed at an angle.
● Wear protective equipment when working.
●Before use, securely tighten the drill chuck, cam lever, and stopper ring.