SUGATSUNE (190021272) 4670-600 slide rail

[Features]
●The position at which the self and soft closing mechanism operates is 20 mm before the drawer is completely closed for rail lengths up to 350 mm, and 36 mm for rail lengths of 400 mm and above.
●Since the self and soft closing mechanism is built into the rail, it is as easy to install as a conventional rail.
●It is a 3-step slide rail that can pull out the inner rail completely.
● Overtravel is possible for rail lengths of 350 mm or more.
●Smooth sliding can be obtained even if the cabinet is slightly deformed due to the impact absorption effect of the outer rail mounting part.
● Comes with a resin spring that absorbs noise and shock.
●Inner rail can be removed by lever operation.

[Use]
●For various industrial equipment.

【specification】
- Width (mm): 12.5
- Height (mm): 45.5
- Length (mm): 600
- Travel distance (mm): 606
- Rated load (N) pair / vertical: 294
- A (mm): 128
● B (mm): 192
● C (mm): 444
●D (mm):-
●E (mm): 119
● F (mm): 215
● G (mm): 343
●H (mm):-
● I (mm): 529

[Specification 2]
●Self & soft closing mechanism
- Maximum drawer width: Rail length + 200mm

[Material/Finish]
●Steel

[Set contents/accessories]
- Cross recessed truss tapping screw 4 x 12

【Note】
● Design the maximum width of the drawer to be the rail length + 200 mm or less.
●Do not change the combination of the inner rail and the outer rail.
●The load capacity in the table below is the static load at CHUO of the rail when the drawer side rail is extended.
● Do not push in with a strong force while the soft closing mechanism is operating. It will cause oil leakage.