TRUSCO Ensat [[R lower]] 302 steel split groove M4 P0.7 L8

[Features]● Ensat [[R Lower]] is an insert nut with excellent workability that can be used for resin, aluminum, etc., where straight tapping tends to cause female thread breakage. ●Has a split groove or three-hole shaped cutting edge and cuts the mating material with its own blade, so front tapping is not required. ● If you reinforce the internal thread with Ensat [[R Lower]], you can use aluminum or resin for parts, which helps reduce weight. ●Ensat [[R Lower]] supports the force applied to the inner thread with an outer thread that is one size larger, so it can withstand higher forces than straight taps. ● Reinforcement using Ensat [[R lower]] is limited by the shear strength inherent in the mating material or the mechanical strength of the bolts used. ●Type 302 (split groove type) is a general-purpose type that can be used for aluminum alloys with free-cutting properties and resins with high plasticity.

[Applications] ●For reinforcing and preventing damage to screws and tightening male screws.

[Specifications] - Applicable bolt thread: M4 - Pilot hole diameter (mm): resin 5.9-6.1, light metal 6.1-6.2 - Outer thread (mm): 6.5 - Inner thread pitch (mm): 0.70 - Length (mm) : 8

[Specification 2] Split groove type

[Material/Finish] SUM22L free-cutting steel (equivalent) hexavalent chromate

[Set contents/accessories]
-

[Caution] ● Ensart [[R Lower]] is a registered trademark of KKV Corporation.