HALDER swing clamp size 40 with clamp bolt

[Features]
●It can be quickly clamped by hand using a bolt or clamp lever.
●It can be clamped in a narrow space because it is compact.
●It is easy to clamp at a high position using the height adjustment cylinder.

[Use]
-

【specification】
-Clamping force (N): 10000
- Turning direction / angle: 360 ° left and right
-Clamp stroke (mm): 40
-Height (mm): Max 171.0
- Mounting screw (mm): M12
●d=40mm / h1 max.=135mm

[Specification 2]
●The position of the clamp can be adjusted steplessly using the positioning ring EH23310.0350, and the clamp arm can be brought to the same position repeatedly.
●When using a positioning ring, dimension h2 will be 7mm larger (stroke s will INA 7mm).
● There are two fixing methods: use T-groove and T-nut (DIN508).
●Use bolts to fix directly to the substrate of the jig.
●Install so that the entire bottom surface of the clamp is in contact with a flat surface.
●Clamp height is limited to h1.
●Reference Height adjustment cylinder EH-23310 and spacer plates EH-1107 and EH1108 can be used to clamp at high positions.
●In addition, when clamping at a low position, it is possible to attach a swing pad EH?22730.
●Maximum holding force: 10kN

[Material/Finish]
Hardened steel, carburizing and quenching, blackening, polishing

[Set contents/accessories]
-

【Note】
-