HALDER swing clamp size 40 with clamp bolt

[Features]● Can be quickly clamped by hand using a bolt or clamp lever. ●It can be clamped in a narrow space because it is compact. ●It is easy to clamp at a high position using the height adjustment cylinder.

[Use]
-

[Specifications] - Clamping force (N): 10000 - Rotating direction/angle: Left and right 360° - Clamp stroke (mm): 20 - Height (mm): Max 106.0 - Mounting screw (mm): M12 - d = 40 mm /h1 max.=70mm

[Specification 2] ● The position of the clamp can be adjusted steplessly using the positioning ring EH23310.0350, and the clamp arm can be repeatedly brought to the same position. ●When using a positioning ring, dimension h2 will be 7mm larger (stroke s will INA 7mm). ● There are two fixing methods: use T-groove and T-nut (DIN508). ●Use bolts to fix directly to the substrate of the jig. ●Install so that the entire bottom surface of the clamp is in contact with a flat surface. ●Clamp height is limited to h1. ●Reference Height adjustment cylinder EH-23310 and spacer plates EH-1107 and EH1108 can be used to clamp at high positions. ●In addition, when clamping at a low position, it is possible to attach a swing pad EH?22730. ●Maximum holding force: 10kN

[Material/Finish] Hardened steel, carburizing and quenching, black oxide, polishing

[Set contents/accessories]
-

【Note】
-