HALDER Thread Clamp Lifting Pin Stainless Steel

[Features]
● Lifting pins can be attached and detached simply by pressing a button.
● Faster and easier attachment and detachment than eyebolts.
●For installation, press the button and insert the screw engagement part into the screw hole (coarse).
●Compared to eyebolts, there is no need to screw in and unscrew each time.

[Use]
● For transporting jigs, molds, construction materials, and as a substitute for eyebolts.

【specification】
-Screw diameter: M12
Working load (kN): 6.2
- Length (mm): 111.5
- Width (mm): 49
- Thickness (mm): 21.5
- Withstand load F1 (kN): 6.2
- Neck length (mm): 24

[Specification 2]
-

[Material/Finish]
-Pins and shackles: stainless steel
A spring: Stainless steel
●Push button: Aluminum (orange oxide film treatment)

[Set contents/accessories]
-

【Note】
●Insert the pin all the way down and screw it all the way in.
●After inserting the pin, check that the orange button has returned to its initial position and that the threaded portion is completely clamped before use.
●If the screw part is not completely clamped, the workpiece may drop. Please be sure to read the instruction manual before use.
●Use only for tapped holes made of steel.
● Withstand load F1 (kN) is a value in the vertical tensile direction.