HALDER lifting pin self-locking heat treated steel 35L

[Features]
●It is a sturdy hanging tool that can be handled quickly and easily.
●The movable shackle has a safety bar to prevent the button from being unintentionally pressed.
●There is no need for tapped holes on the object to be hung, a hole of H11 (dimensional tolerance) is sufficient.
● Corrosion resistance.
● Lifting pins can be attached and detached simply by pressing a button.

[Use]
● For transporting jigs, molds, construction materials, and as a substitute for eyebolts.

【specification】
-Dimensions (mm) d1: 8.3
●Dimensions (mm) l1: 35
●Dimensions (mm) d3: 21.5
●Dimensions (mm) l7: 49
●Dimensions (mm) l8: 87.5
●Dimensions (mm) Mounting hole H11: 8.3
- Withstand load F1 (kN): 1.5
-Dimensions (mm) d1: 8.3

[Specification 2]
● With unlocking function
-Heat resistance: Up to 250°C, can be combined with a locating bush (sold separately)
- Locating bush (sold separately): 22350.0900 to .0936 (for d1 = 8, 10, 12, 16) can be combined
●CE mark acquired

[Material/Finish]
●Pin: Heat-treated steel (heat-treated, manganese-phosphate treated)
Shackle: Heat-treated steel (heat-treated, manganese-phosphate treated)
A spring: Stainless steel
● Push button: Aluminum (red oxide film treatment)

[Set contents/accessories]
-

【Note】
●The allowable load has a safety factor of 5.
●Before use, check the lifting pins and mounting holes, and stop using immediately if any abnormality is found.
●If the dimensions of the mounting holes for the lifting pins are not appropriate, or if the usage is incorrect, the object may fall, resulting in a serious accident.
●Mounting holes must be processed appropriately. Please be sure to check the instruction manual before use. Improper use may cause the workpiece to fall.
● Withstand load F1 (kN) is a value in the vertical tensile direction.