ASTRO PRODUCTS AP Electrometric Tester Plasma INA Polarity Detection 2001000009855 ASTRO PRODUCTS
お気に入り機能をご利用いただくにはログインが必要です。
閉じる
【order ID】2541143
【basic item number】2001000009855
【brand name】ASTRO PRODUCTS
【minimum order quantity】10
【packages】1
【manufacturer name】WORLDTOOL Co., Ltd.
【Country of origin】China
【Weight】0.1KG
[Features]
It can be used on everything from small bikes to trucks.
[Applications]
A tester that can check the electrical status of wiring and fuses
[Specifications] Total length: 152mm (excluding cord) Usable range: DC6V to DC24V Cord length: up to approx. 1.8m
[Specification 2]
Can measure from DC6V to DC24V
Red LED lights up when positive polarity is applied
Green LED lights up when negative polarity INA
Buzzer sounds when power is turned on
Magnet on the side of the clip
[Material/Finish]
ABS (main body)
Clip (steel)
[Set contents/accessories]
-
【Note】
*The tip of the tester is sharp, so be careful when handling it to avoid injury, and be sure to attach the protective cap after use.
*When testing the voltage by inserting the probe into the wiring, do not insert it into the same place.
*When using in the engine compartment, be careful when handling the cord so that it does not get tangled.
*The tone and volume will change depending on the tester's contact condition and voltage status.
*If you pull the cord too hard, it may not return to its original position.
It can be used on everything from small bikes to trucks.
[Applications]
A tester that can check the electrical status of wiring and fuses
[Specifications] Total length: 152mm (excluding cord) Usable range: DC6V to DC24V Cord length: up to approx. 1.8m
[Specification 2]
Can measure from DC6V to DC24V
Red LED lights up when positive polarity is applied
Green LED lights up when negative polarity INA
Buzzer sounds when power is turned on
Magnet on the side of the clip
[Material/Finish]
ABS (main body)
Clip (steel)
[Set contents/accessories]
-
【Note】
*The tip of the tester is sharp, so be careful when handling it to avoid injury, and be sure to attach the protective cap after use.
*When testing the voltage by inserting the probe into the wiring, do not insert it into the same place.
*When using in the engine compartment, be careful when handling the cord so that it does not get tangled.
*The tone and volume will change depending on the tester's contact condition and voltage status.
*If you pull the cord too hard, it may not return to its original position.
- regular price
- ¥1,249
- Selling price
- ¥1,249
- regular price
-
- unit price
- /Around
Sale
sold out
tax included
Use the right and left arrows to navigate the slideshow, or swipe left or right if using a mobile device




