BURRTEC Copper Center Foil Brush C−1 1647100 BURRTEC

[Features]
This is a small diameter (Ф25 to Ф76) wheel brush.
Destructive testing is conducted based on the US national standard (ANSI) to set the maximum rotation speed.
Can be used at Kosoku speeds of 20,000 RPM and can be stacked to create a wide brush.
Made of SUS302, so it is resistant to rust and corrosion
Perfect balance
Twin ring structure
RoHS Directive (2011/65/EU), RoHS Directive ((EU)2015/863) compatible products

[Applications]
For removing burrs, rust, scale and carbon.
For cleaning screws and boiler tubes.
For cleaning interiors and hard-to-reach areas.
For uniform edge finishing.
For cleaning and polishing the inside and outside of pipes.
For finishing the exterior.
For roughening surfaces for adhesion.
For maintenance work on aircraft, space rockets, shipbuilding, nuclear power plants, and chemical plants.
For wire stripping.

【specification】
Outer diameter (mm): 25
Wire diameter (mm): 0.15
Thickness(mm):4.7
Hole diameter (mm): 6.4
Hair length (mm): 6.35
Maximum operating speed (rpm): 20000
Compatible adapter: A mounting arbor/plastic adapter (sold separately) is required for installation.

[Specification 2]
Compatible tools: Micro grinder, drill, automatic machine

[Material/Finish]
Brush part: Stainless steel wire

[Set contents/accessories]
-

【Note】
Please select the type of machine and power brush that are appropriate for the intended use. Using an unsuitable model or using it for purposes other than its intended use can lead to accidents and is dangerous. Do not use it for purposes other than its intended use.
Please check the maximum allowable rotation speed (circumferential speed) printed on the package, label, catalog, and other related documents, and use within the allowable range. Never use it beyond this range.
When operating a power brush, be sure to wear the brush protection cover, gloves, a safety helmet, dust-proof tight-fitting protective glasses, and a mask to ensure safe operation.
Generally, when using a power brush, burrs, scale, dirt, slag, etc. are scattered with considerable force along with the filament (wire fragments), so keep away from anything that is flammable, explosive, or easily damaged. Also, wear clothes that cover your skin so that grinding dust does not come into direct contact with your hands, feet, etc.
If wire brush filaments (wire fragments) or grinding powder fly off, it can be dangerous, so people in the vicinity of the work (within 15m of the brush) should also wear protective glasses and clothing during work. (As a consideration for people in the vicinity other than the workers, please install curtains, clear people away, or instruct them to block off the area.)