Asahi EAZY WELD galvanized repair rod ST-350 2 pieces/set

[Features] ● Easy welding without the need for equipment, with about 5 times the strength of soldering. ● Heat the welding base material to the working temperature of various rods (welding rods). ● You can get better results by checking the appropriate temperature with an infrared thermometer. ●Keep the base material at an appropriate rod melting temperature. ● Rub the rod against the base material and melt the rod at the temperature of the base material for repair work. ●Let it cool naturally for about 1 minute until the melted rod loses its luster.

[Use]
-

[Specifications] - Tensile strength (PSI): 39000 - Compressive strength (PSI): 60000-75000 - Shear strength (PSI): 34000 - Conductivity (%IACS): 24.9 - Type: Galvanized repair - Heat resistance temperature (°C) ): 200 to 300 Type: Galvanized repair

[Specification 2] - Galvanized repair rod ST-350 2 pieces/set - Size: 5 x 5 x 350 mm

[Material/Finish] ● Tin ● Zinc ● Copper

[Set contents/accessories]
-

[Caution] ●Working with iron scraps that have been scraped off may cause corrosion.●Be careful not to overheat the base material and melt it.If the thickness of aluminum exceeds 5 mm, use the included gas. Use acetylene gas because it is very difficult to maintain the working temperature with a burner. If the temperature of the base material is difficult to rise, placing a refractory brick under the base material will increase efficiency. Rod Do not expose the (welding rod) directly to fire. If it is rapidly cooled with water, etc., its strength will be significantly reduced. If it is not solidified, blowing it with air will cause it to splatter, which is very dangerous. Welding will not occur due to wear and tear.